The Solid Wood Floor Restoration Specialists
If you’re looking for solid wood floor restoration in Hertford, WoodMaster are second to none. We have many years of experience and training in dustless wood restoration, sanding, deep cleaning, scratch removal and sealing of all natural and engineered wood. Over this time we have also invested top of the range equipment for cleaning and restoring all wood floor types to a brilliant finish, including oak, pine, maple, birch, walnut and more.
You can find exactly the right package to serve your needs with WoodMaster, so get in touch with our friendly team today!
How to tell when your solid wood floors need restoring
- Has it lost that just-laid finish?
- Has your wood floor become marked, scuffed and damaged by furniture and foot traffic?
- Has the old lacquer or oil started to peel away, making it difficult to clean and maintain?
- Does your floor quickly loose its shine after mopping?
Benefits of the service
- We will rejuvenate your solid wood floor, all at a fraction of the cost of expensive replacements
- Maximise the lifespan of your floor
- Uneven wood floors become smooth and soft again under foot
- Our long lasting protection makes it easier to maintain the floor in future
- Our system is 98.7% dust free and we always take care to cause as little disruption as possible
WoodMaster’s solid floor restoration process:
- Step 1 – Free site survey and provide a written estimate to detail the requirements of the floor and best potential options for restoration. We will agree on the full cost for the project along with arranging suitable dates for work to be completed.
- Step 2 – When we arrive at your home or business, we begin by sanding the boards to strip away old oils and lacquer. Our large industrial belt and planetary sanding machines cut your board smooth and flat, preparing it for the best possible finish. We have also recently invested in a new 3 head machine that is ideal for modern engineered boards where belt sanders cannot be used.
- Step 3 – Next we completely strip away old sealer around all edges right to the skirting boards using our dustless edging machines, and treat the floor with our 3 head finishing machine to get rid of any micro fine scratches from the sanding process. This leaves it smooth and ready for the first coat of new sealer.
- Step 4 – We’ll give you a demonstration of stain and finish options on your floor so you know what it’ll look like. If you want, we can apply a natural lacquer for a great looking and hardwearing finish, or we could use a stain to add colour and change the appearance of the floor more drastically.
- Step 5 – Base coat applied to fill up the wood and give it is primary stage of protection.
- Step 6 – Once the base coat is dry we then complete a light sand the floor one final time to remove any areas that spike up from the base coat of sealer. This gets the floor ready for the final finish.
- Step 7 – Application of 2 coats of top finish. This can be a 1 or 2 pack lacquer depending on the condition of the wood or we can apply oils when a change of colour or premium level of smoothness is required.
- Step 8 – Once dry, the floor is ready for customer sign off. It’s normally safe to walk on after a couple of hours.
Full maintenance advice and after care products can be provided upon request.
Why choose WoodMaster:
- We are fully insured, with plenty of experience in the industry
- Our trained team always works safely
- Quality added value of service which is far cheaper than costly replacements
- Minimum disruption to your home or business
- Friendly, personal service
- Unlike many other cleaning and restoration companies, we move furniture!
FAQs
Yes, no problem. The sanding process will be selected so that we cut deep enough to remove the scratches and damage that is present. Also if Some holes and grooves are too deep to sand we can advise on a filing method that will improve the appearance of these areas.
We are happy to give a ballpark figure from pictures and room sizes, as this can help customer budgeting on renovation projects if they are unsure whether to restore or replace, but ultimately we would need to carry out a full survey and demo before any work can take place.
Yes, we are happy to carry out a free demo on your wooden floor. The best way for us to do this is to bring one of the smaller dustless edging machines and sand 1 board x 1m of linear length. This will show the natural colour the wood returns to and we can then discuss which product is best to return the wood to the colour or look of your preference. The demo is also great as it can allow us to work out how many sanding grits and processes are required, which also helps with firming up a fixed cost for the project.
The length of time required for the floor to dry depends on the type of product that is used. We will advise you once work is complete.
Depending on the level of damage and thickness of old surface finishes, most household projects under 50 sqm take 1.5 days. On the first day we can sand the areas and get the base coat on. This is left to dry and then we return the following morning to start applying the 2 top coats. Again, smaller rooms with furniture take longer, whereas bigger open spaces which are completely clear can be completed in a timely fashion.
Every job is different but during the free survey we measure up, do a free demonstration clean to show the results we can achieve, and from this we send over a full proposal for you to browse at your own leisure. We do not give prices on the day or put you under any pressure for an answer there and then
All products used are within the manufacturer’s guidelines, and where applicable your flooring manufacture own brand products can be used.
Depending on the type of wood and condition, excellent results can be achieved with our restoration services as we are bringing back a fresh new layer of the wood. However, an old Victorian pine floor will always look aged and have patina but this is often seen as a positive with the character of a period property.
