Wood Floor Polishing Specialists in Stockport
WoodMaster Stockport are Stockport’s local wood floor polishing specialists. Our dedicated and professional team is carefully trained in dustless wood restoration techniques for both natural and engineered wood surfaces. WoodMaster boasts years of experience and has invested in the best polishing equipment available to achieve the best results for our clients. All of this means we can bring an unparalleled level of service. Our wood floor polishing service will breathe new life into all types of wooden floor including pine, oak, maple, walnut, birch, and many more.
The team at WoodMaster Stockport has been polishing commercial and domestic wooden floors for many years. We offer a variety of wood floor care packages to suit each customer’s individual needs. Our service is one of the best available and will leave your wooden floor with a brilliant finish while protecting it from future wear.
How to tell if your wood floors need polishing?
- Has your wooden floor become faded and lifeless?
- Has foot traffic left scuffs and scratches on the wood?
- Is the lacquer or oil worn down?
- Has the wood floor lost its vibrancy?
- Does mopping and cleaning make no difference?
Benefits of our wood floor polishing service in Stockport
- A brighter, more welcoming appearance for your floor
- A professional seal maximises the lifespan of the wooden floor
- Wooden floors that feel rough will be transformed with a smooth and soft finish
- It will be easier to keep the floor clean in future
- The system we use is almost dust-free, so minimises inconvenience for you
The wood floor polishing process at WoodMaster Stockport:
- Step 1 – We start with a survey and provide you with a free written estimate. We determine what requirements your wooden floor has and what methods we’ll need to use to get the best out of it. Once we have agreed on the cost of the polishing we will schedule a convenient time and date to attend.
- Step 2 – We’ll begin by stripping all old sealers from the edges right up to the skirting boards. We’ll then treat the floor using our 3 head finishing machine to buff out any fine scratches. This smooths the floor and prepares it for the sealer.
- Step 3 – Finishes and stain options are demonstrated on the floor so the client can get a good impression of the finish. We can also use a natural lacquer to give the floor a natural and lasting finish, or apply a stain that will change the colour and the appearance of the wood.
- Step 4 – We apply a base coat to fill up the wood grain and provide the floor an initial stage of protection.
- Step 5 – The surface is sanded to treat any areas which prickle up from the base coat of the sealer. The wood is now ready for the final finish.
- Step 6 – We will use two coats of top finish, which can be a 1 or 2 pack lacquer, depending on the wood. If the floor has had a colour change or if the smoothness needs taking even further, we can apply oils.
- Step 7 – When the floor is dry the restoration is complete. The floor will be signed off and the furniture can be returned typically in a few hours.
We provide future maintenance guidance and we can give you advice on after-care products if needed.
Why choose WoodMaster for wood floor polishing in Stockport
- All of our wood restoration work is fully insured
- We use industry-leading products and equipment
- Our service is top quality
- Our work is almost complete dust free and causes minimal disruption to the surrounding areas
- We offer a friendly, personal and local service
- We’re happy to move furniture if requested
FAQs
Yes, no problem. The sanding process will be selected so that we cut deep enough to remove the scratches and damage that is present. Also if Some holes and grooves are too deep to sand we can advise on a filing method that will improve the appearance of these areas.
We are happy to give a ballpark figure from pictures and room sizes, as this can help customer budgeting on renovation projects if they are unsure whether to restore or replace, but ultimately we would need to carry out a full survey and demo before any work can take place.
The length of time required for the floor to dry depends on the type of product that is used. We will advise you once work is complete.
All products used are within the manufacturer’s guidelines, and where applicable your flooring manufacture own brand products can be used.
Depending on the type of wood and condition, excellent results can be achieved with our restoration services as we are bringing back a fresh new layer of the wood. However, an old Victorian pine floor will always look aged and have patina but this is often seen as a positive with the character of a period property.
