The Wood Floor Waxing and Oiling Specialists
WoodMaster are Stockton’s local wood floor waxing and oiling experts, providing dustless wood restoration, sanding, deep cleaning, scratch removal and sealing of all natural and engineered wooden floors at great value prices. Our knowledge, products and equipment are second to none. WoodMaster cleans and restores all flooring types, including oak, pine, maple, birch, walnut and many more.
WoodMaster is a locally-run restoration company, and we’ve been providing our services in Stockton for many years, working with our valued customers to ensure all work is tailored to meet their individual needs.
Our wood floor waxing and oiling services are affordable and efficient, getting results without cutting corners. We are committed to meeting all our clients’ needs and taking care to ensure the unique circumstances of their floor are catered to every time.
How to tell if your wood floors need waxing and oiling
- Is your wood floor tired and lifeless?
- Has it been scratched and scuffed from foot traffic or furniture?
- Has the old lacquer or oil started to wear, making it more difficult to clean and maintain?
- Are you fed up of mopping and cleaning the floor, only for it to quickly lose its lustre again?
Benefits of the service
- We can restore your wood floor back to near new condition
- Extend the life of your floor with our hard wearing seal and protection
- Make the floors in your home pleasant under foot again
- Our durable protection makes it easier to maintain in the future
- Our system is 98.7% dust free and we always aim to cause minimal disruption
WoodMaster’s wood floor restoration process:
- Step 1 – Free site survey and full written estimate to discuss your requirements and the best potential options for your floor. Here we’ll agree on the full costs of the project and arrange suitable dates for us to complete our work. We pride ourselves on arriving on time and seeing the job through until it is complete, with minimum disruption to you.
- Step 2 – Full sanding of boards to remove old oils and bring back virgin boards. We have large industrial belt and planetary sanding machines which cut your board smooth and flat, giving it the best finish, and we’ve also invested in a new 3 head machine designed for newer engineered boards where belt sanders are not suitable.
- Step 3 – We remove old sealers around all edges right to the skirting boards using our dustless edging machines, then treat floor with our 3 head finishing machine to remove micro fine scratches from sanding process, leaving the floor smooth and ready for the application of sealer.
- Step 4 – Discuss and show sample of finishes / stain option in live environment so you can see a real life example of how the finish will look. Here we can apply a natural lacquer which gives a wonderful but durable finish. We even apply a stain to add colour and change the look of the floor completely.
- Step 5 – Apply a base coat to fill up the wood and create the first stage of protection.
- Step 6 – Once the base coat is dry, we then carry out a light sand of the floor to remove any areas that prickle up from the base coat of sealer, preparing the floor for the finish.
- Step 7 – Application of 2 coats of top finish. This can be a 1 or 2 pack lacquer depending on the environment or we can also apply oils when a colour change or premium level for smoothness is required.
- Step 8 – Once dry the floor is now complete and ready for hand over and furniture can be replaced. Floors are normally ready for light traffic with socks and slippers after a few hours.
We can also provide full maintenance advice and after care products where requested.
Why choose WoodMaster:
- Fully insured for domestic and commercial work
- Health and safety compliant
- Our team is experienced and well trained
- Save money on expensive replacements
- Minimum disruption to you or your business
- Friendly, personal service
- We can move furniture
FAQs
Yes, no problem. The sanding process will be selected so that we cut deep enough to remove the scratches and damage that is present. Also if Some holes and grooves are too deep to sand we can advise on a filing method that will improve the appearance of these areas.
We are happy to give a ballpark figure from pictures and room sizes, as this can help customer budgeting on renovation projects if they are unsure whether to restore or replace, but ultimately we would need to carry out a full survey and demo before any work can take place.
Yes, we are happy to carry out a free demo on your wooden floor. The best way for us to do this is to bring one of the smaller dustless edging machines and sand 1 board x 1m of linear length. This will show the natural colour the wood returns to and we can then discuss which product is best to return the wood to the colour or look of your preference. The demo is also great as it can allow us to work out how many sanding grits and processes are required, which also helps with firming up a fixed cost for the project.
The length of time required for the floor to dry depends on the type of product that is used. We will advise you once work is complete.
Depending on the level of damage and thickness of old surface finishes, most household projects under 50 sqm take 1.5 days. On the first day we can sand the areas and get the base coat on. This is left to dry and then we return the following morning to start applying the 2 top coats. Again, smaller rooms with furniture take longer, whereas bigger open spaces which are completely clear can be completed in a timely fashion.
Every job is different but during the free survey we measure up, do a free demonstration clean to show the results we can achieve, and from this we send over a full proposal for you to browse at your own leisure. We do not give prices on the day or put you under any pressure for an answer there and then
All products used are within the manufacturer’s guidelines, and where applicable your flooring manufacture own brand products can be used.
Depending on the type of wood and condition, excellent results can be achieved with our restoration services as we are bringing back a fresh new layer of the wood. However, an old Victorian pine floor will always look aged and have patina but this is often seen as a positive with the character of a period property.
